Our hot water installation, repair and service experts will come to you and provide a great customer experience. Call 0417 108 772.
FAST & RELIABLE HOT WATER REPAIRS GLEN WAVERLEY
Whether you are interested in having a new system installed or you would like to know what your choices are as far as having an existing system repaired is concerned, we will be more than happy to help you evaluate the different options that are open to you and to provide you with competitive quotations for those that appeal to you most.
Don’t wait for your family to be out of hot water on a cold night. Get your system checked now and you’ll save money. Our van is fully equipped with a comprehensive range of plumbing tools, ladders and spare parts.
HOT WATER INSTALLATION | HOT WATER REPLACEMENT
There are two types of water heater - storage systems and instantaneous (or continuous flow) systems:
Storage Water Heaters
Water is heated and stored in an insulated tank for use when it is required. These systems can operate on mains pressure or from a gravity feed tank.
Mains Pressure: Hot water is delivered at a similar pressure and flow rate to cold water so more than one outlet can usually be turned on without greatly affecting pressure. The storage tank is usually located at ground level inside or outside the house.
Constant Pressure or Gravity Feed: Hot water is delivered at lower than mains pressure from a tank located in the roof of the house. Pressure depends on the height difference between the tank and the point of use. Gravity feed systems are most common for properties not connected to mains water.
Storage tanks may be made of copper, glass (enamel) lined steel or stainless steel. Copper and glass-lined tanks typically have a sacrificial anode to reduce tank corrosion, which needs to be replaced every 5 years or so, depending on water quality.
Instantaneous Water Heaters
Instantaneous systems heat only the water required and do not use a storage tank. They can operate on natural gas, LPG or electricity. Gas models are available with either electronic ignition or a pilot flame or hydro powered units.
Instantaneous systems cannot run out of hot water and can be mounted internally or externally.
Standard units can only deliver adequate hot water to one or two points at the same time but high performance gas units can supply several points at once. They also have sophisticated temperature controls.
LEAKING HOT WATER UNIT? LOOKING FOR A NEW HOT WATER SYSTEM? GIVE PDG PLUMBING A CALL ON 0417 108 772.
YOUR LOCAL HOT WATER SPECIALIST IN GLEN WAVERLEY
Problems tend to arise in heaters more than 10-15 years old, so we recommend replacing your tank if we feel a repair won’t do any justice. Not sure if you need a full replacement? Let’s look at some common signs that it’s time to replace:
Sometimes the tank makes noises because the heating element is burning out. If you have flushed out your tank and removed the sediment but are still hearing strange noises, it could be time to replace the entire unit.
HOT WATER STOPS ALTOGETHER
When our customers experience NO hot water, it’s likely there’s a broken heating element.
TOO MUCH SEDIMENT
Hot water tanks see a ton of usage over the years, especially if you have a large family. Most customers are surprised to learn that unchecked mineral buildup inside the tank can clog plumbing lines and shorten the life of the unit.
As mentioned above, heaters generally last 10-15 years. However, any hot water heater that is making noises, failing to produce hot water, or is unable to maintain a constant water temperature needs to be checked as soon as possible.
PDG PLUMBING | PL LIC 43714 | 0417 108 772
our hot water services includes: hot water repairs glen waverley | hot water installation glen waverley | hot water replacement glen waverley